MADE: SLEEVE 2.0

This DIY was too easy not to make a few variations... This time I went with a sheer Metallic. 

Pulling inspiration from Raf's S/S2013 Dior Collection. 

AND Joann Fabrics has a 50% off Coupon this week 

/ FABRIC 1 YARD / T-SHIRT / SEWING MACHINE / PINS / SCISSORS /

Again you can totally hand sew this if you don't have a sewing machine. 

1. Mark the sleeves 

2. Cut off Both sleeves 

3. Cut off the cuff 

4. Cut open the seam on the sleeve. You'll use this for a pattern 

1. Lay the sleeve out over the fabric and cut it out. Add a little seam allowance 

2. Fold the sleeve in half and sew the seam closed 

3 Turn the sleeve right side out, slide the cuff upside down on the sleeve. Zig Zag stitch it closed, stretching the cuff as you go so it gathers the sleeve. 

4.Turn the shirt inside out. slide the sleeve inside the shirt, the sleeve should be right side out. Stitch all around the arm hole. 

Special thanks to Geof for the pictures